About This Career Path
Set up, operate, or tend forging machines to taper, shape, or form metal or plastic parts.
Manufacturing
Set up, operate, or tend forging machines to taper, shape, or form metal or plastic parts.
Manufacturing Industry
Forging Machine Setters, Operators, and Tenders, Metal and Plastic
Average
$40,360
ANNUAL
$19.41
HOURLY
Entry Level
$32,770
ANNUAL
$15.76
HOURLY
Mid Level
$38,700
ANNUAL
$18.61
HOURLY
Expert Level
$48,340
ANNUAL
$23.24
HOURLY
Forging Machine Setters, Operators, and Tenders, Metal and Plastic
Forging Machine Setters, Operators, and Tenders, Metal and Plastic
Supporting Certifications
Degree Recommendations
Forging Machine Setters, Operators, and Tenders, Metal and Plastic
01
Read work orders or blueprints to determine specified tolerances and sequences of operations for machine setup.
02
Position and move metal wires or workpieces through a series of dies that compress and shape stock to form die impressions.
03
Measure and inspect machined parts to ensure conformance to product specifications.
04
Set up, operate, or tend presses and forging machines to perform hot or cold forging by flattening, straightening, bending, cutting, piercing, or other operations to taper, shape, or form metal.
05
Turn handles or knobs to set pressures and depths of ram strokes and to synchronize machine operations.
06
Install, adjust, and remove dies, synchronizing cams, forging hammers, and stop guides, using overhead cranes or other hoisting devices, and hand tools.
07
Start machines to produce sample workpieces, and observe operations to detect machine malfunctions and to verify that machine setups conform to specifications.
08
Confer with other workers about machine setups and operational specifications.
09
Trim and compress finished forgings to specified tolerances.
10
Remove dies from machines when production runs are finished.
Forging Machine Setters, Operators, and Tenders, Metal and Plastic
Common knowledge, skills & abilities needed to get a foot in the door.
KNOWLEDGE
Production and Processing
KNOWLEDGE
Mathematics
KNOWLEDGE
Education and Training
KNOWLEDGE
Mechanical
KNOWLEDGE
Engineering and Technology
SKILL
Operations Monitoring
SKILL
Active Listening
SKILL
Monitoring
SKILL
Operation and Control
SKILL
Reading Comprehension
ABILITY
Near Vision
ABILITY
Oral Comprehension
ABILITY
Arm-Hand Steadiness
ABILITY
Control Precision
ABILITY
Information Ordering
Forging Machine Setters, Operators, and Tenders, Metal and Plastic
.FAA POSITION
** PAY RATE: $21/hr
** 1 POSITION
Subco Bonus Program to 3k, and a change in the pay-out structure:
• $1k at 14 days w/perfect attendance;
• $1k at 60 days
• $1k at 90 days
Constructs, maintains, and tests mechanical equipment, machinery, and components. Identifies parts for replacement and machines that need new parts and places orders as necessary. Requires a high school diploma or its equivalent. May be required to complete an apprenticeship and/or formal training in area of specialty. May require 0-2 years of experience in the field or in a related area.
**Pay Details:** $21.00 per hour
Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable.
Equal Opportunity Employer/Veterans/Disabled
To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.pdstech.com/candidate-privacy
The Company will consider qualified applicants with arrest and conviction records subject to federal contractor requirements and/or security clearance requirements.
Full Time
.FAA POSITION
2nd Shift 2:30PM - 11PM
*** Testing Experience Required ***
Subco Bonus Program to 3k, and a change in the pay-out structure:
• $1k at 14 days w/perfect attendance;
• $1k at 60 days
• $1k at 90 days
*** CANDIDATES MUST BE AVAILABLE TO WORK OVERTIME
*** Testing Experience Required ***
** PAY RATE: $ 20.50/hr
Performs standard testing processes on a variety of equipment and records and analyzes results. Requires knowledge of industry specific tests and testing equipment including calipers, drop mics, C-mics, bore gauges, inside/outside micrometers, etc. Requires 0-2 years of experience in the field or in a related area. Requires torque wrench use and knowledge. Requires mechanical experience and experience with hand tools. Familiar with standard concepts, practices, and procedures within a particular field. Relies on limited experience and judgment to plan and accomplish goals. Performs a variety of tasks. Works under direct supervision.
**Pay Details:** $20.50 per hour
Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable.
Equal Opportunity Employer/Veterans/Disabled
To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.pdstech.com/candidate-privacy
The Company will consider qualified applicants with arrest and conviction records subject to federal contractor requirements and/or security clearance requirements.
Full Time
.FAA POSITION
1st Shift 6AM-2:30PM
Subco Bonus Program to 3k, and a change in the pay-out structure:
• $1k at 14 days w/perfect attendance;
• $1k at 60 days
• $1k at 90 days
*** CANDIDATES MUST BE AVAILABLE TO WORK OVERTIME
** PAY RATE: $ 20.50/hr
Performs standard testing processes on a variety of equipment and records and analyzes results. Requires knowledge of industry specific tests and testing equipment including calipers, drop mics, C-mics, bore gauges, inside/outside micrometers, etc. Requires 0-2 years of experience in the field or in a related area. Requires torque wrench use and knowledge. Requires mechanical experience and experience with hand tools. Familiar with standard concepts, practices, and procedures within a particular field. Relies on limited experience and judgment to plan and accomplish goals.
**Pay Details:** $20.50 per hour
Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable.
Equal Opportunity Employer/Veterans/Disabled
To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.pdstech.com/candidate-privacy
The Company will consider qualified applicants with arrest and conviction records subject to federal contractor requirements and/or security clearance requirements.
Full Time
2nd Shift 2:30PM-11PM
Subco Bonus Program to 3k, and a change in the pay-out structure:
• $1k at 14 days w/perfect attendance;
• $1k at 60 days
• $1k at 90 days
** 2 POSITIONS
*** CANDIDATES MUST BE AVAILABLE TO WORK OVERTIME
** PAY RATE: $ 20.50/hr
Performs standard testing processes on a variety of equipment and records and analyzes results. Requires knowledge of industry specific tests and testing equipment including calipers, drop mics, C-mics, bore gauges, inside/outside micrometers, etc. Requires 0-2 years of experience in the field or in a related area. Requires torque wrench use and knowledge. Requires mechanical experience and experience with hand tools. Familiar with standard concepts, practices, and procedures within a particular field. Relies on limited experience and judgment to plan and accomplish goals. Performs a variety of tasks. Works under direct supervision.
**Pay Details:** $20.50 per hour
Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable.
Equal Opportunity Employer/Veterans/Disabled
To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.pdstech.com/candidate-privacy
The Company will consider qualified applicants with arrest and conviction records subject to federal contractor requirements and/or security clearance requirements.
Full Time
Packaging Machine Operator
Job Details
Job Location
Casa Grande - Casa Grande, AZ
Job Category
8800 - Packaging and filling machine operators and tenders
Description
We are looking for motivated individuals who are detail-oriented and exhibit a strong desire to learn and grow. While managing a 24/7 production operation, the Daisy Brand Packaging Team strives to provide a work-life balance with an average of 45 hours/week. Come work with state-of-the-art equipment where there are opportunities for personal and professional growth.
No Experience? Entry level positions also available.
Learn to run Daisy Brand's state-of-the-art packaging machines while earning competitive pay and industry leading benefits. Apply through this job posting to be considered for an entry level role.
Position Overview
The Daisy Brand Machine Operator, also referred to as the Packaging Technician, has the primary responsibility of product staging, machine set up, operating, cleaning, and sanitizing the filling machines. The operator will work in a team of 3-6 people who manage the filling and packaging of sour cream and cottage cheese.
Principal Duties
+ Set up, troubleshoot, operate, and change over automated filler, box forming, and packing equipment.
+ Manual loading of packaging materials i.e., cups, foil, shippers, etc.
+ Stage packaging supplies utilizing pallet jacks.
+ Perform and record production and quality controls.
+ Clean and sterilize packaging equipment manually and clean in place.
+ Preventative machine maintenance.
+ Follow Daisy Brand food safety and quality protocols.
+ Follow GMPs (Good Manufacturing Practices), housekeeping and safe work practices.
+ Other duties as assigned.
Qualifications
+ High School diploma or G.E.D. required.
+ Strong mechanical aptitude; maintenance-related background preferred.
+ Packaging machine operation and troubleshooting experience preferred.
+ Attention to detail regarding machine operation, and outgoing package quality.
+ Must be able to understand and follow all GMP and Safety requirements.
+ Proficiency in Microsoft Office applications.
+ Must be able to lift 50 pounds.
+ Must be able to stand, bend, lift, and twist throughout shift.
+ Must be able to multitask while working with a team.
+ Experience in food/dairy production environment preferred.
Pay Rate
Competitive pay based on experience and qualifications. Entry level positions from $20/hr.
Company Overview
For five generations spanning over a century, Daisy Brand has been a family-owned company committed to providing the freshest, most wholesome dairy products. The company is headquartered in Dallas, Texas with manufacturing facilities in Garland, Texas (1998), Casa Grande, Arizona (2008), and Wooster, Ohio (2015).
Daisy is the market leader in two billion-dollar categories, sour cream and cottage cheese, and generates over half a billion in revenues annually. Daisy Sour Cream represents 1 out of every 2 sour cream purchases in the United States and is the largest sour cream brand in food service, military, and club. It is recognized by consumers for A Dollop of Daisy, a tagline that put this once small brand on the map. Daisy Cottage Cheese is Americas #1 cottage cheese brand and continues to bring new consumers into the category with its innovative single serve packaging and consistent high quality. Daisy recently expanded into a new category with the launch of two dip products and is in the process of expanding distribution.
Daisys core values, Clean and Trust, resonate in all aspects of our business operations. In 2008, the Foundation for Financial Service Professionals awarded Daisy the prestigious American Business Ethics award.
While maintaining a strong culture of curious and innovative problem-solvers, Daisy Brand has more than doubled employment over the last 15 years and is continuing to grow. Currently, we are proud to employ over 650 full-time staff across more than 25 states throughout the United States.
At Daisy Brand, we value longevity and aim to foster a working environment where employees can envision a long-term career. Companywide, the average employee tenure stands at over seven years. Our corporate office and sales team each boast an average tenure exceeding eleven years, while our manufacturing facilities also demonstrate strong employee retention with tenures averaging over seven years.
Daisy Brand offers an industry leading benefits package that includes:
+ A no-deductible, $0 premium option for employee-only health coverage.
+ 401(k) with 50% company match on first 8% of earnings you contribute.
+ Safe harbor and profit-sharing company contributions to 401(k).
+ Company paid short- and long-term disability coverage.
+ Company paid 2X annual salary life and AD&D insurance.
+ 4 weeks annual paid time off.
+ 20 floating holiday hours and 6 company paid holidays.
+ Extra time off for volunteering.
+ Tuition reimbursement.
+ Fitness membership reimbursement.
+ And more
Daisy Brand is a nicotine-free company. Daisy Brand is an Equal Opportunity Employer. Veterans and disabled encouraged to apply.
Full Time
Learn a new trade and work in the A/C, no experience necessary, we will train you! Local leading manufacturer for over 20 years has positions available for responsible and motivated Machine Operators to build residential awnings and patio covers.
These positions offer:
$17.00 per hour to start with opportunities for advancement and bonuses
* Health Insurance, bonuses paid holidays paid sick times and paid vacation
* Work hours are Monday -- Friday 6:00am to 2:30 pm with overtime
* No overnight travel -- all work local
These positions require:
*Great attitude, work ethic and willingness to learn
* Ability to work independently in the field without close supervision
* Must Pass a background check
* Must pass math and measuring test at time of application
* Must pass physical screening and e-verify
APPLY IN PERSON between 8:00 am and 2:00 or for earlier, later or Saturday times call Jared at 602-762-8387.
At: Liberty Awnings and Shades, 450 E Watkins St., Phoenix, AZ 85004
Entry (student)
Construction & Architecture
Full Time
Employee Value Proposition
Working for a world-class leader in building structures and bridges, a Schuff Steel HMO-A brings his/her expertise and knowledge in fabrication to build some of the most complex and high-profile projects in the commercial building, bridge and industrial sectors. Critical to the field of forming material by operation of CNC machines and equipment such as Plasma Arc, NC Punch Plasma, Beam Line Machine, Beam Punch Operator and NC Angle Master. Also operates machines under HMO B and C classification. The HMO-A utilizes a high degree of proficiency while utilizing full skills of the trade including knowledge and understanding of CNC machine programs. To perform this job successfully, an individual must be able to perform each essential responsibility satisfactorily.
In return, the Company will offer competitive market-based compensation and comprehensive health insurance benefits. We are committed to professional development and growing our business. We are looking for a professional with a growth mindset who desires a progressive long-term career.
Core Responsibilities
+ Layout, read, interpret blueprints, shop drawings and other company documents.
+ Operates heavy steel fabrication machinery according to company requirements.
+ Load and unload equipment with material manually and through the use of an overhead crane or magnet.
+ Perform daily preventative maintenance.
+ Troubleshoot, properly mark and stamp materials.
+ Perform daily cleaning of machines.
+ Locate parts and supplies for machine operation and grind material.
+ Other duties may be assigned.
+ Perform other routine duties per management direction.
+ Must adhere to and follow all safety rules and PPE requirements
Education/Training - Work Experience
High school diploma or general education degree (GED), and/or 12 months experience; completion of a closely related vocational training course through an accredited school may substitute for the required experience
Specialized Knowledge – Certificates & Licenses
+ Equipment Knowledge & Skills – includes the operation of CNC machines and equipment such as Plasma Arc, NC Punch Plasma, Beam Line Machine, Beam Punch Operator and NC Angle Master. Also operates machines under HMO B and C Classification. Overhead cranes and forklifts
+ Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
+ Mathematical Skills: Ability to add, subtract, multiply and divide in all units of measure.
+ Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.
+ Certificates, Licenses, Registrations: None
DBM Global including its U.S. subsidiaries is an Equal Opportunity Employer with an Affirmative Action Plan
*Recruiters* - Resumes submitted without current/valid vendor agreement will become property of DBM Global Inc. Any recruiting/staffing firm or agency wishing to do business with DBM Global must contact the Talent Acquisition Department at (602) 252-7787 . Recruiting/staffing firms may NOT contact hiring managers directly. Firms that do not honor this request will be removed from consideration.
Full Time
Compensation: $22.25 Hr, FULL TIME , Day / 1st Shift
We are excited to announce an upcoming relocation of our facility from Oak Cliff to Garland, TX. As part of this transition, we are seeking dedicated individuals to join our team in various positions. This relocation presents an exciting opportunity to work in a new state of the art facility.
Interviews will be conducted at our Oak Cliff facility. However, please note that operations will be moved to Garland, TX between April and June. You will have the opportunity to relocate with us if desired or continue working at the Oak Cliff location until the transition is complete.
Responsibilities
+ The Manufacturing Line Operator / Machine Operator will be responsible for performing various tasks to set up, operate, monitor, troubleshoot, and report any required maintenance on assigned machines
+ Responsible for inspecting the product and adjusting as necessary to maintain quality
+ Keep work areas clean to avoid product contamination and maintain a safe workplace
+ Follow all safety guidelines, GMPs, and regulations laid out by OSHA and the organization
+ Monitor the quality of products
Experience and Ideal Candidate
+ Preferred 2+ years (1 minimum) experience in a Production/Manufacturing environment as a Machine Operator
+ Accuracy and attention to detail with ability to multi-task
+ Excellent organizational and time management skills
+ Analytical abilities and aptitude in problem-solving
+ Able to work in cold and wet environment (38-40 degrees) for multiple hours
+ Wearing Personal Protective Equipment (PPE) while in the warehouse
+ Able to lift, bend and twist as well as standing on your feet throughout every shift
Benefits:
+ Team Outings and Community Service Opportunity
+ Significant Growth Opportunities- Hourly to Salary
+ Leadership Training
+ Competitive pay
+ Accrued Paid Vacation
+ Medical, Dental, and Vision Insurance
+ Free Meals every shift!
We are changing the fast food industry! Our mission is to make fresh, nutritious food convenient and affordable for ALL! Our core values are rooted in Service, Compassion, Commitment, and Speed. We pride ourselves on our community - we donate thousands of salads a week! Join us at Salad & Go to help us nourish the world, one meal at a time!
Consistent with the Americans with Disabilities Act (ADA), Salad and Go will provide reasonable accommodation to participate in the job application or interview process when requested by a qualified applicant or employee with a disability, unless such accommodation would cause an undue hardship.
Salad and Go is proud to be an equal opportunity employer.
#LI-DNI
Full Time
Employee Value Proposition
Working for a world-class leader in building structures and bridges, a Schuff Steel HMO-A brings his/her expertise and knowledge in fabrication to build some of the most complex and high-profile projects in the commercial building, bridge and industrial sectors. Critical to the field of forming material by operation of CNC machines and equipment such as Plasma Arc, NC Punch Plasma, Beam Line Machine, Beam Punch Operator and NC Angle Master. Also operates machines under HMO B and C classification. The HMO-A utilizes a high degree of proficiency while utilizing full skills of the trade including knowledge and understanding of CNC machine programs. To perform this job successfully, an individual must be able to perform each essential responsibility satisfactorily.
In return, the Company will offer competitive market-based compensation and comprehensive health insurance benefits. We are committed to professional development and growing our business. We are looking for a professional with a growth mindset who desires a progressive long-term career.
Core Responsibilities
+ Layout, read, interpret blueprints, shop drawings and other company documents.
+ Operates heavy steel fabrication machinery according to company requirements.
+ Load and unload equipment with material manually and through the use of an overhead crane or magnet.
+ Perform daily preventative maintenance.
+ Troubleshoot, properly mark and stamp materials.
+ Perform daily cleaning of machines.
+ Locate parts and supplies for machine operation and grind material.
+ Other duties may be assigned.
+ Perform other routine duties per management direction.
+ Must adhere to and follow all safety rules and PPE requirements
Education/Training - Work Experience
High school diploma or general education degree (GED), and/or 12 months experience; completion of a closely related vocational training course through an accredited school may substitute for the required experience
Specialized Knowledge – Certificates & Licenses
+ Equipment Knowledge & Skills – includes the operation of CNC machines and equipment such as Plasma Arc, NC Punch Plasma, Beam Line Machine, Beam Punch Operator and NC Angle Master. Also operates machines under HMO B and C Classification. Overhead cranes and forklifts
+ Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
+ Mathematical Skills: Ability to add, subtract, multiply and divide in all units of measure.
+ Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.
+ Certificates, Licenses, Registrations: None
DBM Global including its U.S. subsidiaries is an Equal Opportunity Employer with an Affirmative Action Plan
*Recruiters* - Resumes submitted without current/valid vendor agreement will become property of DBM Global Inc. Any recruiting/staffing firm or agency wishing to do business with DBM Global must contact the Talent Acquisition Department at (602) 252-7787 . Recruiting/staffing firms may NOT contact hiring managers directly. Firms that do not honor this request will be removed from consideration.
Full Time
Employee Value Proposition
Working for a world-class leader in building structures and bridges, a Schuff Steel HMO-A brings his/her expertise and knowledge in fabrication to build some of the most complex and high-profile projects in the commercial building, bridge and industrial sectors. Critical to the field of forming material by operation of CNC machines and equipment such as Plasma Arc, NC Punch Plasma, Beam Line Machine, Beam Punch Operator and NC Angle Master. Also operates machines under HMO B and C classification. The HMO-A utilizes a high degree of proficiency while utilizing full skills of the trade including knowledge and understanding of CNC machine programs. To perform this job successfully, an individual must be able to perform each essential responsibility satisfactorily.
In return, the Company will offer competitive market-based compensation and comprehensive health insurance benefits. We are committed to professional development and growing our business. We are looking for a professional with a growth mindset who desires a progressive long-term career.
Core Responsibilities
+ Layout, read, interpret blueprints, shop drawings and other company documents.
+ Operates heavy steel fabrication machinery according to company requirements.
+ Load and unload equipment with material manually and through the use of an overhead crane or magnet.
+ Perform daily preventative maintenance.
+ Troubleshoot, properly mark and stamp materials.
+ Perform daily cleaning of machines.
+ Locate parts and supplies for machine operation and grind material.
+ Other duties may be assigned.
+ Perform other routine duties per management direction.
+ Must adhere to and follow all safety rules and PPE requirements
Education/Training - Work Experience
High school diploma or general education degree (GED), and/or 12 months experience; completion of a closely related vocational training course through an accredited school may substitute for the required experience
Specialized Knowledge – Certificates & Licenses
+ Equipment Knowledge & Skills – includes the operation of CNC machines and equipment such as Plasma Arc, NC Punch Plasma, Beam Line Machine, Beam Punch Operator and NC Angle Master. Also operates machines under HMO B and C Classification. Overhead cranes and forklifts
+ Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
+ Mathematical Skills: Ability to add, subtract, multiply and divide in all units of measure.
+ Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.
+ Certificates, Licenses, Registrations: None
DBM Global including its U.S. subsidiaries is an Equal Opportunity Employer with an Affirmative Action Plan
*Recruiters* - Resumes submitted without current/valid vendor agreement will become property of DBM Global Inc. Any recruiting/staffing firm or agency wishing to do business with DBM Global must contact the Talent Acquisition Department at (602) 252-7787 . Recruiting/staffing firms may NOT contact hiring managers directly. Firms that do not honor this request will be removed from consideration.
Full Time
Manufacturing
Not sure where to begin?
Career Exploration