About This Career Path
Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, solder, or heat treat metal products, components, or assemblies. Includes workers who operate laser cutters or laser-beam machines.
Manufacturing
Set up, operate, or tend welding, soldering, or brazing machines or robots that weld, braze, solder, or heat treat metal products, components, or assemblies.
Manufacturing Industry
Welding, Soldering, and Brazing Machine Setters, Operators, and Tenders
Average
$43,260
ANNUAL
$20.80
HOURLY
Entry Level
$32,590
ANNUAL
$15.67
HOURLY
Mid Level
$43,640
ANNUAL
$20.98
HOURLY
Expert Level
$56,190
ANNUAL
$27.01
HOURLY
Welding, Soldering, and Brazing Machine Setters, Operators, and Tenders
Welding, Soldering, and Brazing Machine Setters, Operators, and Tenders
Supporting Certifications
Degree Recommendations
Welding, Soldering, and Brazing Machine Setters, Operators, and Tenders
01
Inspect, measure, or test completed metal workpieces to ensure conformance to specifications, using measuring and testing devices.
02
Read blueprints, work orders, or production schedules to determine product or job instructions or specifications.
03
Assemble, align, and clamp workpieces into holding fixtures to bond, heat-treat, or solder fabricated metal components.
04
Set up, operate, or tend welding machines that join or bond components to fabricate metal products or assemblies.
05
Lay out, fit, or connect parts to be bonded, calculating production measurements, as necessary.
06
Correct problems by adjusting controls or by stopping machines and opening holding devices.
07
Load or feed workpieces into welding machines to join or bond components.
08
Observe meters, gauges, or machine operations to ensure that soldering or brazing processes meet specifications.
09
Turn and press knobs and buttons or enter operating instructions into computers to adjust and start welding machines.
10
Compute and record settings for new work, applying knowledge of metal properties, principles of welding, and shop mathematics.
Welding, Soldering, and Brazing Machine Setters, Operators, and Tenders
Common knowledge, skills & abilities needed to get a foot in the door.
KNOWLEDGE
Mathematics
KNOWLEDGE
Mechanical
KNOWLEDGE
Education and Training
KNOWLEDGE
Design
KNOWLEDGE
Production and Processing
SKILL
Operations Monitoring
SKILL
Active Listening
SKILL
Critical Thinking
SKILL
Operation and Control
SKILL
Speaking
ABILITY
Control Precision
ABILITY
Near Vision
ABILITY
Manual Dexterity
ABILITY
Problem Sensitivity
ABILITY
Visualization
Welding, Soldering, and Brazing Machine Setters, Operators, and Tenders
All Things Metal is seeking a dedicated full-time Ironworker to join our team.
All Things Metal is a fast-paced environment with an existing culture in a challenging industry. We are looking for individuals to help take us to the next level and that are here to stay. This isn't a temporary position where you'll be laid off in a couple months after you complete a job. We have steady work, with a minimum of 40 hours per week. This position does not require travel outside of AZ and is not per diem.
An Ironworker at All Things Metal is responsible for the accurate erection of structural steel members in accordance with OSHA and AISC guidelines.
This position requires ability to work steel efficiently and accurately to build a level and plumb building in a fast-paced environment.
We are searching for someone to accomplish raising, positioning, aligning and connecting columns beams and other structural members to complete structural framing.
Requirements:
+ Ability to weld 3G & 4G SMAW
+ Ability to weld 3G & 4G FCAW
+ Bolt up structural members
+ Ability to read Erection and Shop Drawings
+ Ability to fabricate structural members in the field
+ Ability to plumb a column
+ Must have experience installing stairs, guardrails, and grab rails
+ Plumbing of Structural Steel
+ Ability to use gridlines and benchmarks to complete layout
+ Must be comfortable with heights
+ Knowledge of commercial construction.
+ Fall protection and safety equipment knowledge
+ OSHA 10 Certification (not required but preferred)
+ Rigging experience and Signaling experience
+ Maintains welding certifications
Responsibilities:
+ Maintain Safety 100% of the time
+ Be able to pass internal random safety audits
+ Always enforce required PPE for all team members
+ Uphold all company policies
+ Be able to complete all assigned tasks with minimal direction
+ Have the knowledge to do the job
+ Maintain all ATM quality standards
+ Maintain all company-built relationships in good standing
Benefits:
+ $18-21 an hour depending on experience and work ethic
+ Steady work!
+ First- Time home buyer incentive with optional home buying references and a $500 bonus
+ Dave Ramsey’s SmartDollar Budget & Financial Education Library
+ Full benefits, including PTO/ Sick time
+ Additional company-wide giveaways
+ 401K plan
+ Health Savings Plan/Flexible Spending Account
+ Family friendly culture events
+ Birthday and Work Anniversary perks
Apply today!
Job Type: Full-time
Salary: $18-21 per hour
Experience level:
+ 1 year +
Shift:
+ Day shift
Weekly day range:
+ Monday to Friday
Work setting:
+ Outdoor work
Ability to commute/relocate:
+ Phoenix, AZ: Reliably commute or planning to relocate before starting work (Preferred)
Work Location: Multiple Locations
Powered by JazzHR
Full Time
All Things Metal is seeking a dedicated full-time Journeyman Ironworker to join our team.
All Things Metal is a fast-paced environment with an existing culture in a challenging industry. We are looking for individuals to help take us to the next level and that are here to stay. This isn't a temporary position where you'll be laid off in a couple months after you complete a job. We have steady work, with a minimum of 40 hours per week. This position does not require travel outside of AZ and is not per diem.
A Journeyman at All Things Metal is responsible for the accurate erection of structural steel members in accordance with OSHA and AISC guidelines.
This position requires ability to work steel efficiently and accurately to build a level and plumb building in a fast-paced environment.
We are searching for someone to accomplish raising, positioning, aligning and connecting columns beams and other structural members to complete structural framing and miscellaneous steel assemblies.
Requirements:
+ Rigging experience
+ Signal experience
+ Ability to weld 3G & 4G SMAW
+ Bolt up structural members
+ Ability to read Erection and Shop Drawings
+ Ability to fabricate structural members in the field
+ Ability to erect stairs and knowledge of basic stair codes.
+ Ability to manage small projects/small crew
+ Be a mentor for an Apprentice
+ Must have experience installing stairs, guardrails, and grab rails
+ Be proficient in connecting & sequencing of erection (understand the job flow)
+ Plumbing of Structural Steel
+ Ability to use gridlines and benchmarks to complete layout
+ Must be comfortable with heights
+ Knowledge of commercial construction.
+ Fall protection and safety equipment knowledge
+ OSHA 10 Certification
+ Signaling crane, connecting steel, operate powered hand tools, operate forklifts, operate aerial working platforms (with certifications)
+ Maintain welding certifications
Responsibilities:
+ Maintain Safety 100% of the time
+ Be able to pass internal & external random safety audits
+ Always enforce required PPE for all team members
+ Uphold all company policies
+ Be able to complete all assigned tasks with minimal direction
+ Have the knowledge to do the job
+ Maintain all ATM quality standards
+ Maintain all company-built relationships in good standing
Benefits:
+ $24+ an hour depending on experience and work ethic
+ Steady work!
+ First- Time home buyer incentive with optional home buying references and a $500 bonus
+ Dave Ramsey’s SmartDollar Budget & Financial Education Library
+ Full benefits, including PTO/ Sick time
+ Additional company-wide giveaways
+ 401K plan
+ Health Savings Plan/Flexible Spending Account
+ Family friendly culture events
+ Birthday and Work Anniversary perks
Apply today!
Job Type: Full-time
Salary: $24 + per hour
Experience level:
+ 3-5 years (The more the better)
Shift:
+ Day shift
Weekly day range:
+ Monday to Friday
Work setting:
+ Outdoor work
Ability to commute/relocate:
+ Phoenix, AZ: Reliably commute or planning to relocate before starting work (Preferred)
Work Location: Multiple Locations
Powered by JazzHR
Full Time
**Description**
**Tradesmen International** is immediately hiring experienced **Welders** for projects located in and around **Glendale, AZ** . This is a first shift opportunity with a pay range of **$22-28/hour** based on experience and skill level. If you are a Welderand want to work alongside other proven craftsmen who emphasize safety, productivity and superior craftsmanship, this is your chance to advance your career!
**Job Scope:**
+ Vertical and OverheadStick & Fluxcore Welding
**Requirements:**
+ Minimum of 5 Years of Experience
+ 232 Wire Certified
+ Pass Drug Screen
**Company Details**
Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry.
Our comprehensive benefits include:
+ Tradesmen+ Rewards Program – earn points for hours worked
+ Vacation Pay
+ Health insurance
+ 401(k) profit-sharing savings plan
+ Incentive programs
+ Tool purchase programs & MORE!
Tradesmen International is an EO employer - M/F/Veteran/Disability
Click here to visit Tradesmen’s full website. (http://www.tradesmeninternational.com)
**Recruiter Name**
Lakedia Thomas
**Location**
US-AZ-GLENDALE
**Posted Date** _3 days ago_ _(4/16/2024 3:46 PM)_
**_Req ID_** _2024-347818_
**_Category_** _Welder - Flat_
**_Travel_** _Yes_
**_Job Board_** _IN_
**_Location_** _US-AZ-GLENDALE_
Full Time
Employee Value Proposition
Working for a world-class leader in building structures and bridges, a Schuff Steel Production Welder brings his/her expertise and knowledge in fabrication to build some of the most complex and high-profile projects in the commercial building, bridge and industrial sectors. Critical to the production process this position welds a large variety of materials by FCAW, SMAW, GMAW and SAW. The production welder welds in all positions utilize a high degree of proficiency while utilizing full skills of the trade including knowledge of common heat reactions of structural metals and is certifiable. To perform this job successfully, an individual must be able to perform each essential responsibility satisfactorily.
In return, the Company will offer competitive market-based compensation and comprehensive health insurance benefits. We are committed to professional development and growing our business. We are looking for a professional with a growth mindset who desires a progressive long-term career.
Core Responsibilities
+ Follows applicable welding procedures (AWS, AISC)
+ Welds on the ground level, above ground and below ground, in any required position.
+ Chips peens and grinds material to prepare for welding or finish.
+ Welds structural, bridge and industrial materials such as plates, sheets, girders, tanks, etc., occasionally involving uncommon structural metals or machine metals under close tolerances of heat application and workmanship.
+ Perform gouging and scarfing as needed.
+ Capable of passing welding tests in accordance to AWS D1.1.
+ Transport material by a crane as needed and required.
+ Keeps work area organized and clean.
+ Perform other routine duties per management direction.
+ Must adhere to and follow all safety rules and PPE requirements
Education/Training - Work Experience
High school diploma or general education degree (GED), and/or 12 months of stable work experience. Must pass required weld test.
Specialized Knowledge – Certificates & Licenses
+ Equipment Knowledge & Skills – variety of hand tools and welding equipment
+ Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
+ Mathematical Skills: Ability to add, subtract, multiply and divide in all units of measure.
+ Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.
+ Certificates, Licenses, Registrations: Cert in AWS D1.1 weld test
DBM Global including its U.S. subsidiaries is an Equal Opportunity Employer with an Affirmative Action Plan
*Recruiters* - Resumes submitted without current/valid vendor agreement will become property of DBM Global Inc. Any recruiting/staffing firm or agency wishing to do business with DBM Global must contact the Talent Acquisition Department at (602) 252-7787 . Recruiting/staffing firms may NOT contact hiring managers directly. Firms that do not honor this request will be removed from consideration.
Full Time
Employee Value Proposition
Working for a world-class leader in building structures and bridges, a Schuff Steel Production Welder brings his/her expertise and knowledge in fabrication to build some of the most complex and high-profile projects in the commercial building, bridge and industrial sectors. Critical to the production process this position welds a large variety of materials by FCAW, SMAW, GMAW and SAW. The production welder welds in all positions utilize a high degree of proficiency while utilizing full skills of the trade including knowledge of common heat reactions of structural metals and is certifiable. To perform this job successfully, an individual must be able to perform each essential responsibility satisfactorily.
In return, the Company will offer competitive market-based compensation and comprehensive health insurance benefits. We are committed to professional development and growing our business. We are looking for a professional with a growth mindset who desires a progressive long-term career.
Core Responsibilities
+ Follows applicable welding procedures (AWS, AISC)
+ Welds on the ground level, above ground and below ground, in any required position.
+ Chips peens and grinds material to prepare for welding or finish.
+ Welds structural, bridge and industrial materials such as plates, sheets, girders, tanks, etc., occasionally involving uncommon structural metals or machine metals under close tolerances of heat application and workmanship.
+ Perform gouging and scarfing as needed.
+ Capable of passing welding tests in accordance to AWS D1.1.
+ Transport material by a crane as needed and required.
+ Keeps work area organized and clean.
+ Perform other routine duties per management direction.
+ Must adhere to and follow all safety rules and PPE requirements
Education/Training - Work Experience
High school diploma or general education degree (GED), and/or 12 months of stable work experience. Must pass required weld test.
Specialized Knowledge – Certificates & Licenses
+ Equipment Knowledge & Skills – variety of hand tools and welding equipment
+ Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
+ Mathematical Skills: Ability to add, subtract, multiply and divide in all units of measure.
+ Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.
+ Certificates, Licenses, Registrations: Cert in AWS D1.1 weld test
DBM Global including its U.S. subsidiaries is an Equal Opportunity Employer with an Affirmative Action Plan
*Recruiters* - Resumes submitted without current/valid vendor agreement will become property of DBM Global Inc. Any recruiting/staffing firm or agency wishing to do business with DBM Global must contact the Talent Acquisition Department at (602) 252-7787 . Recruiting/staffing firms may NOT contact hiring managers directly. Firms that do not honor this request will be removed from consideration.
Full Time
Employee Value Proposition
Working for a world-class leader in building structures and bridges, a Schuff Steel Production Welder brings his/her expertise and knowledge in fabrication to build some of the most complex and high-profile projects in the commercial building, bridge and industrial sectors. Critical to the production process this position welds a large variety of materials by FCAW, SMAW, GMAW and SAW. The production welder welds in all positions utilize a high degree of proficiency while utilizing full skills of the trade including knowledge of common heat reactions of structural metals and is certifiable. To perform this job successfully, an individual must be able to perform each essential responsibility satisfactorily.
In return, the Company will offer competitive market-based compensation and comprehensive health insurance benefits. We are committed to professional development and growing our business. We are looking for a professional with a growth mindset who desires a progressive long-term career.
Core Responsibilities
+ Follows applicable welding procedures (AWS, AISC)
+ Welds on the ground level, above ground and below ground, in any required position.
+ Chips peens and grinds material to prepare for welding or finish.
+ Welds structural, bridge and industrial materials such as plates, sheets, girders, tanks, etc., occasionally involving uncommon structural metals or machine metals under close tolerances of heat application and workmanship.
+ Perform gouging and scarfing as needed.
+ Capable of passing welding tests in accordance to AWS D1.1.
+ Transport material by a crane as needed and required.
+ Keeps work area organized and clean.
+ Perform other routine duties per management direction.
+ Must adhere to and follow all safety rules and PPE requirements
Education/Training - Work Experience
High school diploma or general education degree (GED), and/or 12 months of stable work experience. Must pass required weld test.
Specialized Knowledge – Certificates & Licenses
+ Equipment Knowledge & Skills – variety of hand tools and welding equipment
+ Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
+ Mathematical Skills: Ability to add, subtract, multiply and divide in all units of measure.
+ Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.
+ Certificates, Licenses, Registrations: Cert in AWS D1.1 weld test
DBM Global including its U.S. subsidiaries is an Equal Opportunity Employer with an Affirmative Action Plan
*Recruiters* - Resumes submitted without current/valid vendor agreement will become property of DBM Global Inc. Any recruiting/staffing firm or agency wishing to do business with DBM Global must contact the Talent Acquisition Department at (602) 252-7787 . Recruiting/staffing firms may NOT contact hiring managers directly. Firms that do not honor this request will be removed from consideration.
Full Time
PeopleReady Skilled Trades is currently looking for Certified Journeyman 6G Pipe Welders for a project in Central Phoenix. As a 6G Pipe Welder with PeopleReady Skilled Trades, you?ll support Commercial Contractors in Phoenix. In this 6G Pipe Welder role, you?ll earn $30-$35 an hour and enjoy weekly pay, health insurance benefits and a flexible work schedule. Plus, the more hours you work, the more meaningful prizes you can unlock with Respect the Craft ? our recognition program specially designed to help tradespeople grow and thrive in their careers. Whether you?re new to the trades or a seasoned pro, come take charge of your career with PeopleReady Skilled Trades. Interested? Apply today!
The pay rate for this job is $30 - $35 / hour
Benefits of Working for PeopleReady Skilled Trades
* Work with a team that is motivated to keep you busy.
* PeopleReady Skilled trades offers weekly pay and flexible schedule working on a variety of projects in a large network of contractors.
* Medical, dental, vision, life insurance, and sick time.
* Opportunity to go thru OSHA 10 training if you don't have it already.
* We offer referral bonuses where you can make up to $500 referring a journey level
Job Responsibilities:
* 6G Pipe Welding on a new Commercial Construction Site.
Qualifications & Experience:
* Must have at least 4 Years 6G Pipe Welding Experience
* Must have a current 6G Pipe Welding Certification
* Must have Tools of the Trade Must have reliable Transportation
For more information, please contact on the below details –
1- Name – Elizabeth Albuja
2- Contact Number - (480) 431-0204
SKILLEDTRDPRI
PeopleReady is an equal opportunity employer, and we value diversity. We do not discriminate based on race, religious affiliation, color, national origin, gender, age, marital status, sexual orientation, gender identity, veteran status, disability, or any other basis protected by law. We will get to know you and connect you with jobs that match your skills, experience and preferences. We work hard every single day to find jobs so each employee has opportunity and variety in their work.
Full Time
PeopleReady Skilled Trades is currently looking for Certified Journeyman 6G Pipe Welders for a project in Casa Grande. As a 6G Pipe Welder with PeopleReady Skilled Trades, you?ll support Commercial Contractors in Phoenix. In this 6G Pipe Welder role, you?ll earn $30-$35 an hour and enjoy weekly pay, health insurance benefits and a flexible work schedule. Plus, the more hours you work, the more meaningful prizes you can unlock with Respect the Craft ? our recognition program specially designed to help tradespeople grow and thrive in their careers. Whether you?re new to the trades or a seasoned pro, come take charge of your career with PeopleReady Skilled Trades. Interested? Apply today!
The pay rate for this job is $30 - $35 / hour
Benefits of Working for PeopleReady Skilled Trades
* Work with a team that is motivated to keep you busy.
* PeopleReady Skilled trades offers weekly pay and flexible schedule working on a variety of projects in a large network of contractors.
* Medical, dental, vision, life insurance, and sick time.
* Opportunity to go thru OSHA 10 training if you don't have it already.
* We offer referral bonuses where you can make up to $500 referring a journey level tradesperson.
Job Responsibilities:
* 6G Pipe Welding on a new Commercial / Industrial Construction Site.
Qualifications & Experience:
* Must have at least 4 Years 6G Pipe Welding Experience
* Must have a current 6G Pipe Welding Certification
* Must have Tools of the Trade Must have reliable Transportation
For more information, please contact on the below details –
1- Name – Elizabeth Albuja
2- Contact Number - (480) 431-0204
\#SKILLEDTRDPLUS
PeopleReady is an equal opportunity employer, and we value diversity. We do not discriminate based on race, religious affiliation, color, national origin, gender, age, marital status, sexual orientation, gender identity, veteran status, disability, or any other basis protected by law. We will get to know you and connect you with jobs that match your skills, experience and preferences. We work hard every single day to find jobs so each employee has opportunity and variety in their work.
Full Time
Welder
Apply now »
Date:Apr 16, 2024
Location: Prescott, AZ, United States
Company: Oregon Tool
Work Location: Prescott, AZ
Go one better, together.
We’ve built something we’re extremely proud of, and we think it’s time you became part of it. Working at Oregon Tool, Inc., you’ll build your career and do your best work while contributing to the whole of the company. We're for those who lean into challenges and expect that same attitude from the people around them. We’re a goal-oriented organization that’s firmly committed to creating opportunities for Team Members’ talents to shine and inspire the individuals around them so that we all win together.
At 2,400 Team Members across the globe, you're more than just a link in a chain. From new products, programs, and business units, Oregon Tool, Inc. gives you the space to make systemic change within our business. How will you make your mark?
HIGHLIGHTS:
Hourly Rate: $24.00 - $28.00
Shift: (You decide)
+ 4/10 hr days Mon-Thurs or
+ 5/8 hr days for 40 hrs a week
HOW YOU MAKE AN IMPACT:
The Welder fabricates and welds various types of sheet metal using Metal Inert Gas (MIG), soldering, tacking, and brazing techniques. Uses Computer Aided Drawing specifications, Bill of Materials (BOM), work instructions and documented procedures to produce a quality part. Responsible for maintaining assigned welding equipment. Assists and trains other Team Members on safe welding operations.
THE DETAILS:
+ Supports plant safety program, follows safety procedures, and compliance requirements at all times
+ Sets equipment and assigned machine according to material and part complexity
+ Safely operates welding equipment using MIG, soldering, tacking, and brazing techniques that are wire feed
+ Reads, interprets and follows drawings, diagrams, Bill of Materials, work instructions, and documented procedures
+ Aligns and fits material to drawings and specifications using clamps and jigs; adjusts as necessary
+ Cleans, sands, and manually bends material
+ Replaces and changes out consumable supplies and machine components
+ Ensures quality of parts or products by utilizing a computer-based system to retrieve process documentation and drawings; adjusts as needed
+ Uses data management system (SAP) to record material and/or goods movements as needed
+ Performs autonomous maintenance using manufacturer recommendations, schedules, and established standard work
+ Performs machine cleaning and material disposal for workstation as required
+ Participates in Daily Management System (DMS)
+ Maintains and tracks inventory levels of workstation welding supplies, and other materials as required
+ Performs 5S activities and uses Lean manufacturing methods
+ Participates in continuous improvement events and projects
QUALIFICATIONS & SKILLS:
+ High school diploma or GED required
+ 5+ years experience working in a manufacturing environment
+ 4+ years welding various sheet metals using MIG, soldering, tacking, and brazing;
+ Able to complete responsibilities in a timely, professional, and quality manner
+ High level of accuracy and attention to detail in the performance of job duties
+ High level of dependability and activity
+ Solve problems analytically; search out relevant information and gauge its importance when making decisions
+ Effective written and verbal communication skills; able to express oneself clearly and in technical and non-technical terms
+ Strong math skills
+ Creative thinker with active listening skills
+ Collaborative and effective team player; able to work within teams
+ Set a good example of personal integrity
+ Demonstrate ability and willingness to learn; seek out development activities to improve skills and increase knowledge; learn from other team members and own mistakes
+ Take initiative, seek and act on opportunities to improve organization performance
+ Uses Microsoft Office suite (Outlook, Word, Excel), data management and Computer Aided Drawings (CAD).
WHAT WE OFFER:
+ Medical, Dental, and Vision Benefits available on day one (no waiting period)
+ 401k matching (100% of first 3%, 50% of next 3% = 4.5% match on 6% contribution)
+ Earn up to 120 hours vacation during your first year of service
+ One paid Community Involvement Day available per calendar year
+ Global company with small company feel
+ Safety shoes reimbursed at $100 per year
+ Safety prescription glasses through approved program
WHO WE ARE:
Oregon Tool, Inc. is a global, premium-branded, aftermarket-driven precision-cutting-tool platform. At Oregon Tool, Inc., it is our goal to create, cultivate and sustain a global, inclusive culture, where differences drive innovative solutions to meet the needs of our employees and customers. We invite and encourage applications from all skilled individuals, including from groups that are traditionally underrepresented, not just because it’s the right thing to do, but because it makes our company #SharperTogether.
To learn more about our company and history visit us at: www.oregontool.com
Oregon Tool, Inc. will only employ those who are legally authorized to work. Any offer of employment is contingent on a background investigation and drug screen. Oregon Tool, Inc. does not discriminate based on sex, race, color, religion, age, marital status, national origin, citizenship, disability, veteran status, or any other status protected under law.
During the application process we will not ask for or collect any confidential, proprietary, or sensitive personally identifiable information (e.g., date of birth; driver’s license number; or credit card, bank account or other financial information). If you submit such information, you do so at your own risk, and we will not be liable to you or responsible for consequences of your submission. This notice should not be construed as an offer of employment or creating any terms of employment.
#LI-VR1
Full Time
Boilermaker Welder I - Heavy Duty Truck Shop
Requisition ID: 131059
Location:
Morenci, AZ, US, 85540
Category: Maintenance
Share this Job
Why You Should Apply For This Job:
_At Freeport-McMoRan, we are committed to providing an employment package that recognizes excellence, encourages safe production and a culture supported by our core values. Here, you’ll find a collaborative environment where safety is a top priority, all opinions are valued, and people are empowered to grow in their career._ **_Apply Today! _**
**Where You Will Work**
Located approximately 50 miles northeast of Safford, Arizona on U.S. Highway 191, Morenci operations (an open-pit copper mining complex) has been in continuous operation since 1939. The operation consists of two concentrators, crushed-ore leach pad and stacking system, a low-grade run-of-mine (ROM) leaching system; four SX plants; and three EW tank houses that produce copper cathode.
Morenci is a unique company town where our employees and their families can reconnect with nature through hiking, fishing, camping, hunting and numerous parks. The company offers several amenities, including company housing, a newly constructed daycare and community center, library, health-care facilities, state-of-the-art fitness centers, a movie theater and a skate park. Our dedicated Parks and Recreation Division plans activities for people of all ages, making sure there’s something for everyone to enjoy. Visit the Morenci town website (https://www.morencitown.com/dining) to learn more.
**What You Will Do**
+ Perform duties related to assembly, maintenance, and repair of boilers, pressure vessels, tanks and vats by performing a variety of complex welding processes such as electric resistance, oxy acetylene or arc torches.
+ Perform routine maintenance activities.
+ Develop solutions for various maintenance situations.
+ Complete Work Orders and other maintenance documentation.
+ Train and mentor maintenance employees.
+ Perform other tasks as assigned.
**What You Bring To Freeport**
+ Two (2) years of experience in the crafts of Welder/Boilermaker or a combination of education and experience
+ Proficiency in welding/cutting.
+ Must have completed academic and practical competencies required (this includes Line of Progression requirements for internal employees where LOP Exists) and have experience demonstrating the required aptitude. The selected candidate shall demonstrate the ability to apply knowledge and skills while also passing a written assessment where required. This exam is based on skills/abilities and/or academic knowledge; as well as safety.
+ Ability to understand and apply verbal and written work and safety-related instructions and procedures given in English.
+ Ability to communicate in English with respect to job assignments, job procedures, and applicable safety standards.
**Preferred Qualifications**
**What We Offer You**
The estimated pay range for this role is currently **$26.00 - $35.50/hour.** This range reflects base salary only and does not include bonus payments, benefits or retirement contributions. Actual base pay is determined by experience, qualifications, skills and other job-related factors. This role is eligible for additional discretionary and incentive payment considerations based on company and individual performance. More details will be shared during the hiring process. **Click here (https://performancemanager4.successfactors.com/doc/custom/freeportmc/Total\_Rewards\_Estimate\_2.5.pdf)** to view a sample of Total Rewards Estimate for this role.
+ Affordable medical, dental and vision benefits
+ Company-paid life and disability insurance
+ 401(k) plan with employer contribution/match
+ Paid time off, paid sick time, holiday pay, parental leave
+ Tuition assistance
+ Employee Assistance Program
+ Discounted insurance plans for pet, auto, home and vehicle
+ Internal progression opportunities
+ Learn more (https://jobs.fcx.com/content/Benefits/?locale=en\_US) about our competitive and comprehensive benefits package!
**What We Require **
+ Candidates may be required to pass a medical exam.
+ Candidates must pass all required training and/or testing.
+ Employees may be required to work a non-standard schedule, which may include shift work (other than day shift) at a 24/7, 365-day operation.
+ Freeport-McMoRan promotes a drug/alcohol-free work environment using mandatory pre-employment drug testing and on-going drug and alcohol testing, as allowed by applicable laws.
**Equal Opportunity Employer **
_Please be advised that Freeport-McMoRan will never request payment for job-related expenses from applicants. If you receive any suspicious emails, please disregard them, and report the incident to_ [email protected]_ _._
Energy & Utilities
Full Time
Manufacturing
Not sure where to begin?
Career Exploration